internal surface
英 [ɪnˈtɜːnl ˈsɜːfɪs]
美 [ɪnˈtɜːrnl ˈsɜːrfɪs]
内表面; 缩写词为IS
双语例句
- Laser Texturing Technology of Engine Cylinder Sleeve Internal Surface
发动机气缸套内表面激光造型加工技术 - Application: Milk and food industry, pharmaceutical industry, industries with special internal surface requirements.
用途：牛奶和食品工业、制药行业、特殊内表面要求的行业。 - The utility model is suitable for spraying on the internal surface of the opening barrels or other barrel-shaped workpieces.
适用于对开口桶框或其它桶形工件进行内表面的喷涂。 - Study on the Temperature Change of the Ring Path of the Internal Surface of the Frozen Wall after Moldings Temperature Stress on Lateral Frame of Continuous Beam for Ballastless-track Railway Bridge
砌壁后冻结壁内表面环向温度变化特征分析铁路无砟轨道连续梁横向环框温度力浅析 - The chamber internal surface is constructed of AISI316L stainless steel and is rated for full vacuum.
前箱内表面材料是AISI316L不锈钢，可满足真空条件要求。 - The Influence of the Root Canal Internal Surface Treatment to Bond Strength of Fiber Post to Root Canal
根管内表面处理对纤维桩粘结强度的影响 - The computer system can make the internal surface grinder automatically operative.
计算机系统能使内圆磨床自动地运转。 - The utility model can conduct finishing to the internal surface of the tube material, can improve accuracy and surface smoothness in the tube material and can guarantee the final quality of products.
本实用新型可对管材内表面进行精整，可以大大提高管材内的精度及表面光洁度，以保证最终的产品质量。 - Then, because gushing out of lukewarm water under different operating mode, causes endurance crack of header and tube socket's internal surface under repeatedly thermal shock stress.
而后由于减温水和断口处一定时间内不同工况下的喷溢，致使联箱和管座内壁局部表面在反复热冲击应力作用下疲劳开裂。 - No any evident lubricant collection on the internal surface of the syringe ( including the plunger).
注射器的内表面（包括橡胶活塞），不得有明显可见的润滑剂汇聚。 - We may have too large an internal surface area where the particles are too fine and the pore space may be filled up. Pore space depends on the size and arrangement of the particles.
如果土粒太小，土壤内表面积就会过大，致使土壤孔隙被阻塞。孔隙取决于土粒的大小与排列。 - A conjugation band which is fixed on the internal surface of the closed outer sleeve is used to keep the required shape of the closed outer sleeve pumped with the air.
充入气体的外套由固定在外套内表面的缀带保持其需要的外形。 - Effect of the Shapes of Vanadium Catalysts on the Utilization Ratio of Their Internal Surface
钒催化剂形状对内表面利用率的影响 - A new kind of ceramic coating technique was developed by combining the self propagating high temperature synthesis ( SHS) with centrifugal casting to coat the ceramic compound featured with excellent wear and corrosion resistances on the internal surface of the copper pipe.
将自蔓延高温合成技术与离心铸造技术结合，开发了陶瓷内衬复合铜管技术，可在铜管内表面涂敷耐磨性和耐蚀性优良的陶瓷涂层。陶瓷层与铜管之间结合良好，没有明显的裂缝存在。 - Study on stress intensity factors in the assembling stress of combined thick wall cylinder with internal surface cracks
带内表面裂纹的组合厚壁筒装配应力强度因子研究 - The failure mechanism of lead bronze shaft sleeves with many pits on their internal surface is analyzed by optical metallograph and EPMA.
利用光学金相和电子探针等分析手段，对铅青铜轴套内表面出现凹坑及碎粒造成的磨损失效进行了分析。 - Study on Anticorrosion Construction Process for Internal Surface of Pipe with Small Diameter and Its Application
小口径管线内防腐施工工艺研究及应用 - A selected distribution model has been employed to explore the distribution state of ZnO on NaY internal surface.
与模型估算值进行了比较分析，探讨了ZnO在分子筛内表面的排布状态。 - The general occurrence and distribution of internal surface hollow and hole defect of hot continuous rolled seamless tube are introduced.
介绍了热连轧无缝钢管内表面凹坑、孔洞缺陷的基本形式和分布规律。 - Research on and Design of A Grinding Device Based on Complex Internal Surface
一种针对复杂内曲面磨削装置的研究与设计 - The structure of reticular veins on internal surface of pileus is considered similar to that of external surface.
菌盖内表面与其外表面网状棱纹的结构相同，亦是由疏丝组织组成。 - Study of stress intensity factors for multiple cracks on internal surface of a hydrogenation reactor
某加氢反应器内表面多裂纹应力强度因子的研究 - The stress field and stress intensity factors of internal surface cracks situated at an-gular distortion in thin spherical shells are studied.
对球壳角变形处的应力场和在角变形处的内表面裂纹应力强度因子进行了研究。 - The specific internal surface changed in the opposite tendency;
内比表面以相反的趋势变化； - The plan is determined using the gas protection to cast, through the research to the mechanism of Horizontal Continuous Casting of brass slab, and the analysis of the reason which attachments produce in the graphite internal surface.
对黄铜扁锭水平连铸的机理进行研究，分析石墨内表面的附着物产生的原因，从而确定了采用气体保护进行铸造的方案。 - Through the analysis on the material stress and internal surface quality in blanking, stamping process is determined and the die is designed;
通过对冲连皮过程材料所受应力及冲孔过程内孔表面质量状况的分析，制定了冲连皮工艺，设计了模具； - Air temperature, internal surface temperature of barn, surface temperature on bed, relative humidity, air velocity, concentration of noxious gas, and content of air bacteria were measured.
测定了两个犊牛舍内的空气温度、舍内表面温度、牛床的表面温度、相对湿度、气流速度、有害气体浓度和细菌含量。 - The fresnel reflection of the crystal internal surface is studied, when the incident plane is the optical axis of the biaxial crystal.
研究了双轴晶体入射面是主轴截面时，晶体内表面的菲涅尔反射。 - Have three-dimensional porous structure, the porosity of 90% or more is preferable, the internal surface, is conducive to cell adhesion and ingrowth, but also conducive to the discharge of nutrient metabolism.
具有三维多孔结构，材料具有多空性和孔隙率，孔隙率最好在90%以上，内表面积大，既有利于细胞的粘附和长入，又利于营养成分代谢产物的排出。